Purposes - medically and cosmetically
Standards for settings and treatment - for current strength (amplitude) and frequency (impulse)
The values stated are for average people. Case-by-case, a person's individual sensitivities vary. Start the ball rolling with average values and together with the client/patient find the best setting for that person.
It is however advisable to start with average settings of minus 1.0 to 2.0 for amplitude, and minus 10 to 20 for impulse, for children and sensitive people. LED displays show the exact numbers.
A higher and lower setting can always be made in step with amplitude and impulse. Any increase should however only be carried out in agreement with the Client/Patient, since the effect is only improved if the Client/Patient feels good. The setting is then written on the respective Client/Patient data sheet so the procedure can be continued with the correct setting during a follow-up treatment.
Less is sometimes also more. Note however that even if desired treatment success occurs earlier than the stated duration of treatment, this should nevertheless be adhered to so as to ensure sustainability.
It is vital that the crackling sound of the VIS INFLUERE® rod be explained to the Client/Patient, since they will get an ancillary effect along with the intended treatment.
This small, harmless spark discharge releases pure ozone. In addition to accelerating the metabolism, it also yields a bactericidal and germicidal (bacteria) effect. This pure ozone penetrates the skin and cleanses the blood.
Direct treatment with the glass tip
The glass tip is positioned directly on the part of the body which is to be treated. The tip is gently, without exerting a great deal of pressure, administered all around the area to be treated. After this continue on the trigger points pausing for a max. of 20 seconds on the same site. It is also advisable to carry out the treatment with the tip and with the tip positioned at an angle too.
Direct treatment is also possible, if the skin is not directly touched. I.e. It also works when there is material between the skin and the tip.
This triggers a gentle or a stronger prickling, depending on the setting. This prickling is wholly benign and if anything releases pure ozone which penetrates through the pores in the skin and cleanses it.
Indirect treatment
The Client / Patient or the person carrying out the treatment takes the glass tip in their hand. The person holding the glass tip should NOT come into contact with iron or any similar metal, since this might trigger a small electric shockand might be frightening. For this reason the Client / Patient should use a VIS INFLUERE®-earthing mat.
The temperature of the glass tip remains constant and is at most increased from the heat of the hands.
(Holding is totally safe and can be shown by way of a demonstration to the Client / Patient by the person carrying out the treatment, before any direct treatment takes place.)
Massaging the Client / Patient with two hands
The Client / Patient holds the centre of the rod with one hand and the glass tip in the other hand.
The amplitude and impulse settings are to be set in advance. However the device is not to be set higher to provide the Client / Patient an acclimatisation period. The person administering the treatment now slowly increases the primary values. Since both hands are free, treatment with two-hands can be started. S/he places both hands on the areas of the body to be treated and strokes these sites gently with their fingertips.
The Client / Patient will feel a tingling sensation on these area. The current is concentrated on these areas which will become intensively supplied with blood and warmed up.
Massage of the Client / Patient using one hand
The person carrying out the treatment takes the rod in one hand instead of the Client / Patient and administers an indirect current massage with one hand.
During indirect treatment types it is crucial that the massage finger is constantly moving.
Combination
If a variety of treatments are intended, e.g. a combined knee, calves and thigh treatment, direct treatment can start with the calf, then the knee via indirect, then the thigh, once again using a direct application.
Energy charging (self charging)
Energy charging can be also be carried out by the Client / Patient themselves, while s/he is lying down, they hold the glass tip in one hand and let the energy flow in. Duration: 5 minutes to 10 minutes.
Additional instructions
Prior to the first treatment initiation we provide instruction once again in the correct implementation, general warning notices for the user and subsequent care of the VIS INFLUERE® High frequency therapy.
Please note that no device replaces the expertise of your doctor or therapist!
VIS INFLUERE® is a very effective 'all-in-one’ tool and excellently complements treatment administered
by your doctor, therapist or medical personnel.
Treatment points and areas
The following diagrams of the treatment points and areas are for illustrative purposes only. Don't use them as instructions, do not replace your knowledge of the human body, the meridians or trigger points. Only highlight the area of application for pain, since the point of pain may perhaps only be the result of some other 'defect’. For instance the jaw/tooth area and the neck may be triggers for specific pain areas.
Compiled by: Werner Demetz, Zürich, sources listed
© DE MED. AG. All rights reserved
Abdrucke oder Verwendungen und Veröffentlichung auch einzelner Passagen bedürfen der schriftlichen Zustimmung.
